NOCO Commercial Doors

High-Speed Fabric & Rubber Doors and Commercial Door Operators in Northern Colorado

Every second a freezer door hangs open, you lose cold air and money. Get high-speed door installation, operator replacement and 24/7 repair for cold storage, food plants and high-traffic warehouses across Northern Colorado and the North Metro.

Call 24/7 · Press 1 for Commercial Service: (720) 500-7480
  • 24/7 Emergency Dispatch
  • Commercial & Industrial Doors Only
  • Rytec, Hormann, LiftMaster, Genie & Manaras Serviced

High-Speed Door Installation

Request an install quote: Send door sizes, traffic counts and the temperature on each side of the opening using the form below, or call (720) 500-7480.

Fabric high-speed roll-up doors

  • Fast-cycling fabric doors for interior openings between production, staging and shipping.
  • They cut air exchange, dust and forklift wait time at busy aisles.
  • Rytec, Hormann and comparable high-speed systems are specified to fit the opening size, wind exposure and cycle demand.

Rubber and self-repairing high-speed doors

  • Rubber and breakaway-curtain doors built for forklift-heavy openings.
  • Self-repairing designs let the curtain pop out on impact and re-feed into the guides, so one bump doesn't cost you a service call.
  • A good fit where rolling steel doors keep getting hit.

Insulated cold storage & freezer doors

  • Insulated high-speed doors for freezer and cooler transitions, with heated guides and seals where frost is a problem.
  • Built to hold temperature separation between dock, cooler and freezer zones.
  • Install is planned around product moves so the cold chain is never broken.

Commercial Door Operators

Jackshaft operators

  • Side-mounted jackshaft operators drive the door shaft directly. They are the standard choice for rolling steel and sectional doors where headroom is tight.
  • LiftMaster, Genie and Manaras units installed, replaced and repaired.

Hoist operators

  • Hoist operators mount above the door and carry a manual chain hoist for power outages.
  • Sized for heavy rolling steel curtains and high-cycle openings.

Trolley operators for sectional dock doors

  • Ceiling-mounted trolley operators for standard-lift sectional dock doors with open headroom.
  • They retrofit manual dock doors so crews stop hand-lifting doors at every trailer.

High-speed door down? Operator dead?

24/7 rapid dispatch for commercial and industrial doors only.

Call 24/7 · Press 1 for Commercial Service: (720) 500-7480

High-Speed Door Repair

Curtain breakaway reset & re-feed

  • After a forklift strike, a breakaway curtain is reset, re-fed into the guides and cycled so it seals correctly.
  • Torn fabric panels, windows and bottom edges are replaced so the door holds temperature and keeps dust out.

Drive, VFD & controller faults

  • Variable frequency drives (VFDs), motors, encoders and control panels are diagnosed by fault code.
  • Limits and speed profiles are re-tuned so the door opens fast without slamming.

Activation: loops, radar & pull cords

  • Floor loops, motion radar, photo-eyes, pull cords and push buttons are tested and adjusted.
  • Badly tuned activation leaves doors open far longer than they need to be. Fixing it is one of the fastest energy savings in a cold storage building.

Where High-Speed Doors Pay Off

Cold storage & freezer transitions

  • Less cold air lost at every pass, less frost on floors and evaporators, and steadier product temperatures.
  • Cold storage clusters around Commerce City and Weld County food distribution are prime candidates.

Food & beverage processing

  • Separation between raw, cooked, packaging and shipping zones.
  • Washdown-tolerant materials for sanitation-heavy plants.

High-traffic warehouse aisles

  • Forklifts stop waiting on slow doors.
  • Fewer impact repairs than rolling steel or sectional doors in the same opening.

Maintenance Plans for High-Speed Doors

High-speed doors cycle constantly, so small faults add up quickly. Scheduled maintenance visits cover:

  • Curtain and seal condition, breakaway components and guide alignment.
  • Drive, VFD, brake and belt or chain inspection.
  • Activation and safety device testing: loops, radar, photo-eyes and light curtains.
  • Operator checks on LiftMaster, Genie and Manaras units serving the same building.
  • A written report per door with recommended repairs, ranked by urgency.

High-Speed Door FAQs

How fast do high-speed doors open and close?

It depends on the model, size and settings. High-speed fabric and rubber doors are built to open and close many times faster than a standard rolling steel door. Speed is set during install so the door clears traffic quickly without risking contact.

Are high-speed doors worth it for cold storage?

For busy freezer and cooler openings, usually yes. A door that closes quickly after each pass loses far less conditioned air, cuts frost buildup and protects product temperatures. Payback depends on traffic, the temperature difference across the opening and your energy costs. An install quote can walk through the numbers for each opening.

What is the difference between a jackshaft and a hoist operator?

A jackshaft operator mounts beside the door and drives the shaft directly. It's a common fit for sectional and rolling doors with limited headroom. A hoist operator mounts above or beside a rolling steel door and includes a manual chain hoist for operating the door during a power outage. Door weight, headroom and duty cycle decide which is right.

Can an existing rolling steel door be motorized?

In most cases, yes. A manual chain or crank rolling steel door can be fitted with a jackshaft or hoist operator from LiftMaster, Genie or Manaras, plus the photo-eyes or safety edges required for automatic operation. The door's springs and curtain are checked first to make sure the door is balanced.

What happens when a breakaway curtain is hit by a forklift?

On self-repairing and breakaway designs, the curtain releases from the guides instead of tearing or bending. Many reset automatically on the next cycle. If it doesn't reset, or the fabric is torn, call for a curtain reset and re-feed so the opening seals again.

Faster Doors. Tighter Cold Chain. Fewer Impact Repairs.

High-speed door installation, operator replacement and 24/7 repair for cold storage, food processing and distribution facilities across Northern Colorado and the North Metro.

Commercial and industrial doors only.

Request Dispatch or a Commercial Door Quote

Tell us the door and the problem. For a door down right now, calling (720) 500-7480 is the fastest route to dispatch.

Service Needed (required)

Commercial and industrial facilities only. For emergencies, call (720) 500-7480 24/7.

Call 24/7 Dispatch: (720) 500-7480